使用
自動攪拌一體機遇到無法啟動的問題要怎樣處理?
How to deal with the problem that the automatic mixer cannot be started?
1.確定堵塞的原因。為了這種自動攪拌一體機不會造成此類障礙的診斷,應測試電池。您需要確定電池電量是否不足。
1. Determine the cause of the blockage. In order to solve the diagnosis that this kind of automatic mixing machine will not cause such obstacles, the battery should be tested first. You need to determine if the battery is low.
2.檢測并啟動系統。
2. Detect and start the system.
3.在檢測焚燒同步帶時會發生打滑現象,并且不會產生火花。
3. There will be slippage and no spark when detecting the burning synchronous belt.
4.檢查火花的質量??梢匀∠路倩€圈,并可以使用電火花探測器檢測火花是否正常。
4. Check the quality of spark. The incineration coil can be removed and the spark detector can be used to detect whether the spark is normal.
5.測試燃油系統。其燃油系統的診斷可分為兩部分:燃油供給系統的診斷和噴射器回路的診斷。燃料供應系統可以通過測量燃料的流量和壓力進行檢測。測量燃油流量的一種好方法是加載燃油供應管路以測試管路。
5. Test the fuel system. The diagnosis of fuel system can be divided into two parts: diagnosis of fuel supply system and diagnosis of injector circuit. The fuel supply system can be detected by measuring the flow and pressure of the fuel. A good way to measure fuel flow is to load the fuel supply line to test the line.
6.防盜系統的檢測:其防盜系統也發生在一些經常被忽視的供油系統中。一些混合器制造商在防盜系統的數據流中包含參數標識。在許多型號上,防盜系統的模塊未經適當?shù)某跏蓟捅桓鼡Q。
6. Detection of anti-theft system: the anti-theft system also occurs in some oil supply systems which are often ignored. Some mixer manufacturers include parameter identification in the data stream of the anti-theft system. On many models, the anti-theft system module is replaced without proper initialization.
自動攪拌一體機無法啟動情況處理就是這些,希望對你有幫助。
Automatic mixing machine can not start up, this is how to deal with the situation, hope to help you.