自動攪拌一體機為什么會發生活塞爆震現象?
Why does piston knock occur in automatic mixer?
活塞爆震缸的主要原因如下:活塞與缸壁之間的間隙太大。發動機的活塞裙和氣缸的標準間隙為0.143-0.182,磨損極限為0.35-0.40。發動機運轉一段時間后,氣缸活塞磨損并且潤滑不良?;钊蜌飧字g的匹配間隙由于磨損而增大,并且在氣環中略微出現嚴重的臺階,從而導致活塞撞擊氣缸,聲音異常。
The main causes of piston knock cylinder are as follows: the gap between piston and cylinder wall is too large. The standard clearance between piston skirt and cylinder is 0.143-0.182, and wear limit is 0.35-0.40. After the engine has been running for a period of time, the cylinder piston is worn and the lubrication is poor. The matching gap between the piston and the cylinder increases due to wear, and there are slight serious steps in the first gas ring, which results in the piston hitting the cylinder and abnormal sound.
經過一段時間的操作后,活塞裙和缸體嚴重磨損,導致嚴重的倒圓并沖擊缸體。每個連桿由于各種原因而變形,導致活塞偏心,間隙變大,氣缸受到撞擊?;钊鸶讓?dǎo)致發動機的燃料消耗過多,發動機燃料消耗差,燃料消耗和經濟性差。當活塞嚴重撞擊汽缸時,它將拉動活塞并使汽缸破裂,從而導致連桿斷裂并損壞汽缸體。
After a period of operation, the piston skirt and cylinder block are seriously worn, resulting in serious rounding and impact on the cylinder block. Each connecting rod is deformed due to various reasons, resulting in eccentric piston, larger clearance and cylinder impact. Piston knock cylinder will lead to excessive fuel consumption, poor fuel consumption and poor fuel economy. When the piston hits the cylinder seriously, it will pull the piston and break the cylinder, causing the connecting rod to break and damage the cylinder block.
自動攪拌一體機活塞爆震原因就是這樣,你明白了嗎?如有更多的疑問可以關注公司網站:
http://klalyy.cn/在線客服會解答您的疑問或來電咨詢我們。!
That's why the piston of the automatic mixer truck is knocking. Do you understand? For more questions, please visit the company's website: http://klalyy.cn/ Online customer service will answer your questions or call us.!