自動攪拌一體車能對混凝土進行快速的攪拌,節省了大量的人力物力,因此成為了工地上不能缺少的機器,為了能夠物盡其用,全自動上料攪拌一體車價格,使用者還需要掌握一些關于攪拌車的各方面知識,今天小編就給大家簡單介紹一下自動攪拌一體車清理土渣的兩種方法吧。
The automatic mixer truck can quickly mix concrete, saving a lot of manpower and material resources, so it has become an indispensable machine on the construction site. In order to make the best use of the materials, the price of the fully automatic feeding mixer truck, the user still needs to master some knowledge about the mixer truck. Today, I will give you a brief introduction of the automatic mixer truck cleaning soil slag Two ways.
攪拌車清洗土渣的方法一:
The first method for cleaning soil residue with mixer truck is as follows:
1.準備好緊急驅動軟管,將攪拌車熄火,卸下液壓馬達上的高壓油管接頭。
1. Prepare the emergency drive hose, turn off the mixer, and remove the high-pressure oil pipe connector on the hydraulic motor.
2.將自上料混凝土攪拌車熄火,將其液壓馬達的高壓油管卸下,并與故障車上的對應接頭用緊急驅動軟管相連。
2. Turn off the self feeding concrete mixer, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding joint on the fault truck with emergency drive hose.
3.發動攪拌車,將其---手柄撥出料位置,故障車內的混凝土即被排出。
3. Start the mixer truck, turn its handle to the discharging position, and the concrete in the fault truck will be discharged.
4.緊急驅動完畢后,全自動上料攪拌一體車,將驅動軟管卸下,并恢復兩車原狀。
4. After the emergency drive is completed, the full-automatic feeding and mixing vehicle will unload the driving hose and restore the original state of the two vehicles.
自自動攪拌一體車清洗土渣的方法二:
The second method is to clean the soil residue with the automatic mixer
托輪和滾道之間放入木楔,以控制攪拌筒的旋轉,一定要注意;將發動機熄火,拆松液壓馬達的一根高壓油管,攪拌筒可自由旋轉,全自動上料攪拌一體車,控制攪拌筒的旋轉,使維修孔轉到下部,然后打開維修孔,清理出筒內混凝土,此時一定要注意,混凝土排出完畢后,恢復攪拌車原狀。
A wooden wedge is placed between the supporting roller and the raceway to control the rotation of the mixing drum; Turn off the engine and loosen a high-pressure oil pipe of the hydraulic motor. The mixing drum can rotate freely. The full-automatic feeding and mixing truck controls the rotation of the mixing drum to make the maintenance hole turn to the lower part, and then open the maintenance hole to clean out the concrete in the cylinder. At this time, pay attention to safety. After the concrete is discharged, restore the mixer truck to its original state.