盗墓笔记小说txt下载,天下高月小说

站內搜索

常見問題

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌一體機的輪胎你維護對了嗎？

所屬分類：常見問題發布時間：2020-07-17 來源：http://klalyy.cn/ 瀏覽量：0

輪胎做為攪拌車的重要組成部分，也是磨損嚴重的部位之一。而且輪胎做為整輛攪拌車的承重部位，如果輪胎磨損過大對攪拌車的也會有著很大的影響。那么該怎樣對自動攪拌一體機的輪胎進行保養？

As an important part of mixer, tire is also one of the most serious parts. Moreover, as the load-bearing part of the whole truck, if the tire wear is too large, it will have a great impact on the safety of the mixer. So how to maintain the tires of automatic mixer?

1、要正確選配和安裝攪拌車輪胎，并按輪胎規格配用相應內胎。同一機械上裝配的輪胎應保證同一企業、同一結構和同一性能。換新輪胎時，應做到整車或同軸同換;帶有方向性的花紋輪胎，應按照規定的滾動方向安裝;換用新輪胎時，應將新輪胎裝在前輪上，修理過的輪胎裝在后輪上。為確保行車，翻新的輪胎不準作轉向輪(前輪)使用。

1. It is necessary to select and install the mixer tire correctly, and use the corresponding inner tube according to the tire specification. Tires assembled on the same machine shall be of the same brand, structure and performance. When replacing a new tire, the whole vehicle or the same axis should be replaced; the tire with directional pattern should be installed in accordance with the specified rolling direction; when replacing a new tire, the new tire should be installed on the front wheel, and the repaired tire should be installed on the rear wheel. In order to ensure driving safety, the retreaded tires are not allowed to be used as steering wheels (front wheels).

2、定期進行攪拌車輪胎換位，設備在行駛一段時間后，前、后輪胎在疲勞和磨損程度上就有所不同，因此應該按規定及時換位。換輪胎有交叉法和循環法兩種。交叉換位法適用于經常在拱性較大的路面上行駛的工程機械設備，而循環換法適用于經常在較平坦的道路上行駛的設備。

自動攪拌一體車

2. Regular tire transposition of mixer truck, after the equipment has been running for a period of time, the fatigue and wear degree of front and rear tires are different, so it should be timely transposed according to regulations. There are two ways to change tires: cross method and cycle method. The cross transposition method is suitable for the construction machinery and equipment which often runs on the road with large camber, while the cyclic transposition method is suitable for the equipment which often runs on the flat road.

3、嚴格遵守攪拌車輪胎充氣標準，充氣后應檢查各部位是否漏氣，并應定時檢查輪胎氣壓，確保符合標準。養成使用氣壓表測量氣壓的習慣，不可用肉眼判斷。保證輪胎有一定的彈性，在承受的規定的負荷時，使其變形不超過規定范圍，保證設備在行駛中具有良好的穩定性和舒適性。備胎的氣壓要充得相對高一些。

3. Strictly abide by the tire inflation standard of mixer truck, check whether there is air leakage in each part after inflation, and regularly check the tire pressure to ensure that it meets the standard. Develop the habit of using a barometer to measure air pressure. Do not judge with naked eyes. Ensure that the tire has a certain elasticity, when bearing the specified load, its deformation does not exceed the specified range, and ensure that the equipment has good stability and comfort in driving. The pressure of the spare tire should be relatively high.

但是，要注意的是，輪胎的存放都應儲存在干燥、冷卻和黑暗的室內，輪胎應該立放，不能堆疊、平方或串心懸掛。而且輪胎存放期不得超過三年。攪拌車做為大型工程機械設備，對于輪胎的使用應該更加慎重。

However, it should be noted that the tires should be stored in dry, cool and dark rooms, and the tires should be placed vertically, and can not be stacked, squared or cross hung. In addition, the storage life of tires shall not exceed three years. As a large-scale construction machinery and equipment, the use of tires should be more cautious.

上一頁：自動攪拌一體車為何受到農村的追捧？下一頁：多功能攪拌車車輪胎偏磨的原因及方法

熱門產品 / HOT PRODUCT