小说网,将夜猫腻小说

站內搜索

常見問題

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌一體車耐磨件的檢查哪幾個方面？

所屬分類：常見問題發布時間：2021-06-04 來源：http://klalyy.cn/ 瀏覽量：0

一般來說自動攪拌一體車耐磨件要經常進行檢查，這樣才能及時的排除機械的故障，保證機械的長期穩定使用。那么都應該做哪些方面的檢查呢?下面自動攪拌一體車耐磨件廠家就來向大家做個簡單介紹。

Generally speaking, the wear-resistant parts of the automatic mixer truck should be checked frequently, so as to eliminate the mechanical faults in time and ensure the long-term stable use of the machinery. So what kind of inspection should we do? The following auto mixer wear parts manufacturers to do a brief introduction to you.

凝土攪拌機耐磨件的檢查主要有兩個方面：

There are two main aspects in the inspection of wear-resistant parts of concrete mixer

1、缸體襯板的磨損程度檢查，針對攪拌臂和攪拌刀的檢查要少每周一次，保持良好的清潔工作，并且要注意查看是不是有松動移位的現象，如果磨損的程度達到一半，就要注意更換，襯板厚度2-3mm時，須更換。

1. Check the wear degree of cylinder liner. Check the mixing arm and mixing knife at least once a week. Keep good cleaning and check whether there is looseness and displacement. If the wear degree reaches half, pay attention to replacement. When the thickness of liner is 2-3mm, replace it.

2、螺栓松緊度也要及時進行檢查，一般來說新?lián)Q的攪拌機耐磨件工作兩天就要進行檢查，查看是不是有松動現象。

2. The tightness of bolts should also be checked in time. Generally speaking, the wear-resistant parts of the new mixer should be checked in two days to see if they are loose.

注意：攪拌刀要定期的進行調整，這樣才能保證發揮正常功效，如果不調整，很可能在攪拌過程中，導致攪拌刀的斷裂，并且加速磨損

Note: the mixing knife should be adjusted regularly, so as to ensure its normal function. If it is not adjusted, it may lead to the fracture of the mixing knife and accelerate the wear during the mixing process

上一頁：自動攪拌一體車罐子不轉是哪出問題了？下一頁：如何使用全自動一體式攪拌車節省燃油？

熱門產品 / HOT PRODUCT