自動攪拌一體車維修 油耗降低的方法
How much is the maintenance cost of automatic mixer truck and how to reduce fuel consumption
隨著各企業減排觀念的日益加深,如何降低自動攪拌一體車的油耗也成為很多企業比較關注的問題,那么小編今天就來給大家普及一下降低自動上料攪拌車油耗的幾個小方法。
With the deepening of the concept of energy conservation and emission reduction of enterprises, how to reduce the fuel consumption of the automatic mixer truck has become a problem of concern to many enterprises. Today, we will popularize several small methods to reduce the fuel consumption of the automatic mixing truck.
在行駛中或啟動時發現自動攪拌一體車輪有異常響聲,要及時檢查軸承及剎車系統是否有故障。如果車輪運轉不正常,就會影響車速,從而使油耗加大。離合器打滑會使動員機的轉數降低。當您在急加速時發現動員機轉速表增加很快,但車速增加卻很慢,這時可以鑒定是離合器打滑了。
If abnormal sound is found in the wheel of automatic mixing unit during driving or starting, timely check whether the bearing and brake system are faulty. If the wheel does not run properly, it will affect the speed and increase the fuel consumption. Slip of the clutch will reduce the number of revolutions of the mobilization machine. When you accelerate rapidly, you find that the speedometer of the mobilization machine increases rapidly, but the speed increases slowly. At this time, it can be identified that the clutch is slipping.
自動攪拌一體車火花塞使用的時間太長,也會出現油耗加大的現象。因?yàn)榛鸹ㄈ麚p壞會使焚燒的能量下降,使攪拌車提速減慢,導致柴油耗損明顯增加。只要更換火花塞就好了。
If the spark plug is used for too long, the fuel consumption will increase. Because the damage of spark plug will reduce the energy of burning, slow down the speed of mixer, and increase the diesel consumption obviously. Just replace the spark plug.
當自動攪拌一體車的溫控開關和節溫器損壞時,會呈現油耗增加的現象。因?yàn)闇乜亻_關和節溫器損壞會使水溫低落,化油器不能正常工作,導致混凝土攪拌車霧化不良,油耗量明顯增加。長時間行駛時,凡是會出現汽缸壓力不符的現象,這時油耗也會明顯增加。如果出現這種情況,那么就需要大修了。
When the temperature control switch and thermostat of the automatic mixer are damaged, the fuel consumption will increase. Because the temperature control switch and thermostat damage will make the water temperature drop, the carburetor can not work normally, resulting in poor atomization of concrete mixer truck, and the fuel consumption is significantly increased. When driving for a long time, the cylinder pressure does not match, and the fuel consumption will increase obviously. If this happens, it will need to be overhauled.