多功能攪拌車忽然不工作了是什么原因
What is the reason why the multi-functional mixer suddenly does not work
確定油路暢通,柴油機供給系統沒有空氣后,可拆開油泵蓋板,板動操縱手柄,撥動油泵拉桿,看拉桿是否靈活和柱塞彈簧是否斷裂。在自動上料攪拌車拉桿靈活和柱塞彈簧沒斷的情況下,可啟動柴油機中速運轉10分鐘,還有斷火現象時,可用一只銅榔頭輕輕敲擊輸油泵大螺帽,一邊敲一邊聽柴油機聲音,如果聲音不正常,說明自動上料攪拌車輸油泵活塞和推桿發卡,進行修理或更換。
After confirming that the oil circuit is smooth and there is no air in the diesel engine supply system, the cover plate of the oil pump can be disassembled, the control handle can be moved, and the pull rod of the oil pump can be pulled to see whether the pull rod is flexible and whether the plunger spring is broken. Under the condition that the pull rod of the automatic feeding mixer truck is flexible and the plunger spring is not broken, the diesel engine can be started to run at medium speed for 10 minutes. In case of fire interruption, a copper hammer can be used to gently tap the big nut of the oil delivery pump, and listen to the sound of the diesel engine. If the sound is abnormal, the piston and push rod of the oil pump of the automatic feeding mixer truck are jammed and repaired or replaced.
油嘴不霧化,油泵柱塞彈簧和彈簧座斷裂,卡死不工作,或是柴油內有水。拆下油嘴總成檢查開啟壓力和霧化,如果油嘴總成正常,可讓用戶用干凈柴油裝入壺中用油路旁接法進行試驗。打開自動上料攪拌車油箱開關,拆下輸油泵進油管,看油流情況,如果油流很快,說明正常,如果油流時斷時續查油路。
The oil nozzle is not atomized, the plunger spring and spring seat of the oil pump are broken, stuck and do not work, or there is water in the diesel oil. Remove the nozzle assembly to check the opening pressure and atomization. If the nozzle assembly is normal, the user can fill the pot with clean diesel oil and conduct the test with the oil way side connection method. Turn on the oil tank switch of the automatic feeding mixer, remove the oil inlet pipe of the oil delivery pump and check the oil flow. If the oil flow is fast, it indicates that it is normal. If the oil flow is intermittent, continue to check the oil circuit.
多功能攪拌車的剛剛停止作業時,發動機的冷卻液,所有零件中的油,排氣管和消聲器都處在高溫下,如果拆缷蓋子或排油或更換濾油器等都會造成燙傷或其它傷害,應等待溫度降下來后再進行保養和檢查。
The engine coolant, oil in all parts, exhaust pipe and muffler are in high temperature when the automatic feeding mixer just stops working. If the cover is removed or the oil is drained or the oil filter is replaced, scald or other injuries will be caused. Maintenance and inspection should be carried out after the temperature drops.
多功能攪拌車,大家有需要找多功能攪拌車的話也可以關注公司網站:http://klalyy.cn
If you need to find a multi-functional mixer, you can also pay attention to the company's website: http://klalyy.cn