梦入神机,已完本玄幻小说排行榜

站內搜索

新聞資訊

公司新聞行業動態

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

攪拌車水的溫度過高酒精是什么狀況？

所屬分類：公司新聞發布時間：2021-04-15 來源：http://klalyy.cn/ 瀏覽量：0

有這樣一種狀況，便是咱們的駕馭員在駕馭攪拌車的時分會常常發覺這樣的一種現象，那便是水的溫度過高，這個究竟什么狀況呢？

There is such a situation, that is, our drivers often find such a phenomenon when driving the mixer truck, that is, the water temperature is too high. What is the situation?

一、焚燒建議車時的操作過程不正確。

1、 The operation process is not correct when burning the vehicle.

二、冷卻介質短少：①防凍液：要求一年四季都要加注防凍液；②水或蒸餾水：暫時代用；③水箱蓋漏水。

2、 Shortage of cooling medium: ① antifreeze: it is required to add antifreeze throughout the year; ② water or distilled water: temporary replacement; ③ water tank cover leakage.

三、小型混凝土攪拌車水泵缺陷：葉輪打滑或卡死導致正時皮帶斷掉；葉輪變形。

3、 Small concrete mixer pump defects: impeller slipping or stuck, resulting in broken timing belt; impeller deformation.

四、冷卻電扇不轉：冷卻電扇或許由溫控開關操控；也或許由水溫傳感器操控。

4、 Cooling fan doesn't work: cooling fan may be controlled by temperature control switch or water temperature sensor.

五、小型混凝土攪拌車水箱阻塞：外部阻塞應用水或氣將臟物除去；內部阻塞會影響冷卻液的循環，一起會發生壓力，這時會有兩種作用，一種是水箱漏水，另一種是在高速行駛時水溫特別高。

5、 Water tank blockage of small concrete mixer: the external blockage should be removed by water or air; the internal blockage will affect the circulation of coolant, and pressure will occur together. At this time, there are two effects, one is water leakage in the water tank, the other is particularly high water temperature when driving at high speed.

六、汽缸損蝕：焚燒室與水道沖，這時會從排水管排水或排白煙，構成水箱經常性缺水；水道與油道沖（機油有水呈白色）；水道與水道沖，構成缸體散熱不良，尤其在高速時影響更大。

6、 Cylinder erosion: when the combustion chamber and water channel are flushed, the water will be drained or white smoke will be discharged from the drain pipe, resulting in frequent water shortage of the water tank; when the water channel and oil channel are flushed (the engine oil is white with water); when the water channel and water channel are flushed, the heat dissipation of the cylinder block is poor, especially at high speed.

七、節溫器損壞：如想拆掉節溫器，此刻應把小循環堵上，這樣能夠確保冷卻液悉數由水箱散熱；裝新節溫器時應留神是否有過水孔。

7、 Thermostat damage: if you want to remove the thermostat, you should plug the small circulation at this moment, so as to ensure that all the coolant is dissipated by the water tank; when installing a new thermostat, you should pay attention to whether there is a water hole.

假定在駕馭攪拌車的時分發現了水溫過高就要靠邊泊車，但不要當即熄火。由于冷卻液的溫度現已很高，降溫才華已達到極限，這時假定當即熄火，歡娛的冷卻液也就間斷了循環。

If you find that the water temperature is too high when driving the mixer, you should pull over and park, but don't turn off the engine immediately. Because the temperature of the coolant is now very high, the cooling ability has reached the limit. At this time, it is assumed that the engine will be turned off immediately, and the entertainment coolant will be interrupted.

過高的溫度得不到冷卻，建議機也是難以承受的。假定先讓建議機怠速作業一瞬間，不斷循環的冷卻液仍是能夠減輕高溫對建議機的影響。

Too high temperature can't be cooled, so it's hard to bear. Assuming that the recommender idles for a moment, the continuous circulation of coolant can still reduce the impact of high temperature on the recommender.

上一頁：多功能攪拌車什么地方半理手徐：燃料添加劑下一頁：l了解攪拌車正確進物料方式

熱門產品 / HOT PRODUCT