當多功能攪拌車出現緩慢的送粉現象時,螺旋輸送機進料緩慢,進料時間超過2分鐘,在正常進料條件下可在20秒內送出。
When the multi-function mixer appears the phenomenon of slow powder feeding, the screw conveyor feeding is slow, the feeding time is more than 2 minutes, and it can be sent out in 20 seconds under normal feeding conditions.
影響因素主要是粉罐的送料不良和螺旋輸送機的損壞。 粉末進料的不良性能的特征在于粉末拱形,粉末罐的排出口處的材料聚集,蝶閥的開口太小以及粉末罐中的材料不足。 螺旋輸送機的損壞主要是由于螺旋葉片的變形,不能正常運輸。
The main influencing factors are poor feeding of powder tank and damage of screw conveyor. The poor performance of powder feeding is characterized by powder arch, material accumulation at the outlet of powder tank, too small opening of butterfly valve and insufficient material in powder tank. Screw conveyor damage is mainly due to the deformation of the screw blade, can not be normal transportation.
1.打開氣錘破拱裝置。
1. Turn on the air hammer arch breaking device.
2.檢查粉末罐排放蝶閥的開度,并將蝶閥保持在完全打開位置。
2. Check the opening of the powder tank discharge butterfly valve and keep the butterfly valve in the fully open position.
3.檢查粉末罐出口處的物料是否結塊。
3. Check whether the materials at the powder tank outlet are caked.
4.檢查螺旋葉片是否變形。 如果變形,請將其拆下進行更正或更換。
4. Check whether the spiral blade is deformed. If it is deformed, remove it for correction or replacement.
如何避免多功能攪拌車中的電擊
How to avoid electric shock in multifunctional mixer
1、如果小型攪拌機的供電設備選擇不當或不匹配,將導致觸電和其他生產事故。
1. If the power supply equipment of small mixer is not properly selected or matched, it will lead to electric shock and other production accidents.
2,電工是持有證書的操作人員,否則會因用電不足而引起觸電等生產事故。
2. Electrician is a professional operator with certificate, otherwise it will cause electric shock and other production accidents due to insufficient safe use of electricity.
3.如果配電室的操作人員沒有接受過培訓,如果攪拌機缺乏用電和非法操作的知識,導致觸電事故,為什么要避免觸電,引起其他生產事故。
3. If the operators in the power distribution room have not received any training, if the blender lacks the knowledge of using electricity and illegal operation, which leads to electric shock accident, why should we avoid electric shock and other production accidents.
4.配電室運行規則,操作規程,警示標志,生產記錄,防護設施不足可能導致觸電等生產事故。
4. Lack of operation rules, operation procedures, safety warning signs, safety production records and safety protection facilities in the distribution room may lead to electric shock and other production accidents.
5.如果沒有措施防止小動物進入配電室,可能會因小動物進入而發生電氣事故,這可能會導致其他事故。
5. If no measures are taken to prevent small animals from entering the distribution room, electrical accidents may occur due to small animals entering, which may lead to other accidents.
6.如果配電室的防雷措施不完善,將導致其他生產事故。
6. If the lightning protection measures of the distribution room are not perfect, it will lead to other production accidents.
8.供電能力和設施不符合用電要求,影響其正常使用壽命。
8. The power supply capacity and facilities do not meet the requirements of safe use of electricity, affecting its normal service life.