攪拌車在上料時有什么要求,如果在進料期間出現堵料的情況要怎么處理,提前如何備料才會相對來說好些,能盡量避免具體來看下吧:
What are the requirements of the mixer when loading, how to deal with the material blocking during the feeding, and how to prepare the material in advance are relatively better. You can try to avoid it. Let's look at the details
有時候我們會使用手動料槍吸料,為了方便操作直接將料槍插入物料桶或者噸袋中,料槍吸料口被嚴實的物料壓縮,強大的負壓將滿滿的物料拉走,這對上料機傷害非常大,且極易堵塞管道。
Sometimes we use the manual material gun to suck material. In order to facilitate operation, we directly insert the material gun into the material barrel or ton bag. The suction port of the material gun is compressed by the solid material, and the strong negative pressure pulls the full material away. This is very harmful to the feeder, and it is very easy to block the pipe.
正確的方式是物料在吸料口和空氣形成一定的氣物混合比,在氣流的推動下均勻流入上料機。這個時候我們需要將料槍設計帶有補氣功能。如果物料積壓時間過長可能很硬,這個時候需要在料槍上裝一個振蕩器,敲碎結塊的物料。
The correct way is to form a certain air-material mixture ratio between the material at the suction port and the air, and flow into the feeder evenly under the push of the air flow. At this time, we need to design the material gun with air supply function. If the material overstocking time is too long, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked material.
了解到了出現上料進出料不順,堵料的現象,要怎樣處理,在日后使用中多加注意此現象,本廠主要生產各種攪拌機,有需要什么產品歡迎前來選購。
We know that the phenomenon of feeding and discharging is not smooth and the material is blocked. How to deal with it? We should pay more attention to this phenomenon in the future use. Our factory mainly produces all kinds of mixers. If you need any products, you are welcome to buy them.