自動上料水泥攪拌車有其獨特的工作環境,長時間進行工作,難免會出現水溫過高的情況,這時候不要著急,認真看下面的文章,小編教你怎么處理。
The automatic feeding cement mixer has its unique working environment. If it works for a long time, it is inevitable that the water temperature will be too high. Don't worry at this time. Look carefully at the following article and I will teach you how to deal with it.
1、自動上料水泥攪拌車在普通道路上使發動機過熱。它應盡快降低速度,將汽車開到樹蔭下,或開到相對涼爽的地方停下汽車,但不要急于熄火。
1. The automatic loading cement mixer makes the engine overheat on ordinary roads. It should slow down as soon as possible, drive the car to the shade of a tree, or drive to a relatively cool place to stop the car, but do not be eager to stop.
2、打開機蓋,讓發動機以怠速運行,等待發動機溫度逐漸恢復正常。發動機水溫恢復正常后,關閉發動機。然后等待一會兒,直到發動機的水溫充分下降,然后檢查發動機的冷卻水量。
2. Open the engine cover, let the engine run at idle speed, and wait for the engine temperature to gradually return to normal. After the engine water temperature returns to normal, shut down the engine. Then wait for a while until the water temperature of the engine drops sufficiently, and then check the cooling water volume of the engine.
3、此時,自動上料水泥攪拌車發動機的冷卻水量可能嚴重不足。按照規定的量補充冷卻水后,檢查冷卻系統以確保沒有別的故障,您可以啟動發動機并繼續行駛。還要檢查水箱百葉窗是否被異物堵塞,風扇葉片的工作狀況,發動機皮帶是否打滑以及發動機水泵的運行。
3. At this time, the cooling water of the engine of the automatic feeding cement mixer may be seriously insufficient. After replenishing the cooling water according to the specified amount, check the cooling system to ensure that there are no other faults. You can start the engine and continue driving. Also check whether the water tank shutter is blocked by foreign matters, the working condition of the fan blade, the slipping of the engine belt and the operation of the engine water pump.
The above is a detailed introduction to the automatic mixing machine, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://klalyy.cn/